View B65821C1008T002_1216209.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RM Cores
Series/Type:
RM 6
The following products presented in this data sheet are being withdrawn. Ordering Code B65808N1005D002 B65659F0001X101 B65821C1008T002 B65807C0000R026 B65807J0000Y042 B65808K1006D002 Substitute Product B65808N1006D002 B65659F0001X023 B65821C1008T001 B65807C0000R048 B65807J0000Y066 B65808N1006D002 Date of Withdrawal 2003-08-08 2004-01-23 2003-08-08 2002-08-02 2002-08-02 2003-08-08 Deadline Last Orders 2004-02-29 2004-02-29 2002-12-31 2002-12-31 2004-02-29 Last Shipments 2004-08-31 2004-08-31 2003-03-31 2003-03-31 2004-08-31
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
RM 6 Core
I In accordance with IEC 60431 I Core without center hole
B65807
for transformer applications
I RM cores are supplied in sets
Magnetic characteristics (per set) with center hole without center hole 0,78 28,6 36,6 31 1 050 mm-1 mm mm2 mm2 mm3
l/A le Ae A min Ve
0,86 26,9 31,3 -- 840
Approx. weight (per set) m 4,9 5,3 g
Gapped Material AL value nH K1 M33 N48 40 3 % 63 3 % 100 3 % 160 3 % 250 3 % 315 3 % 400 3 % N41 250 3 % s approx. mm 0,80 0,60 0,38 0,22 0,12 0,08 0,05 0,17
e
Ordering code 1) -J without center hole -N with threaded sleeve -C with center hole B65807-+40-A1 B65807-+63-A33 B65807-+100-A33 B65807-+160-A48 B65807-+250-A48 B65807-+315-A48 B65807-+400-A48 B65807-J250-A41
27,4 43,2 68,5 110 171 216 274 155
1) Replace the + by the code letter "C" or "N" for the required version. Standard version is "C".
203 08/01
RM 6 Core
Ungapped Material A L value nH N26 N30 T57 1) T38 T42 N49 N87 N97 1) N41 2200 + 30/- 20 % 1500 4300 + 30/- 20 % 2670 3500 + 30/- 20 % 2180 8600 + 40/- 30 % 5340 12300 + 40/- 30 % 7630 1700 + 30/- 20 % 1060 960 < 0,15 (50 mT, 500 kHz, 100 C)
B65807
e
A L1min PV nH W/set
Ordering code -C with center hole -J w/o center hole B65807-C-R26 B65807-J-R30 B65807-J-R57 B65807-J-Y38 B65807-J-Y42 B65807-J-R49
2400 + 30/- 20 % 1490 1450 2400 + 30/- 20 % 1490 1450 3100 + 30/- 20 % 1920 1450
< 0,51 B65807-J-R87 (200 mT, 100 kHz, 100 C) < 0,39 B65807-J-R97 (200 mT, 100 kHz, 100 C) < 0,16 (200 mT, 25 kHz, 100 C) B65807-J-R41
1) Preliminary data
204 08/01
RM 6 Accessories
Coil former, squared pins Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s Winding: see "Processing Notes", page 153 For matching clamp and insulating washers see page 210. Sections 1 AN mm2 15 lN mm 30 A R value 69 Pins 4 5 6 6 5 6 Ordering code B65808-N1004-D1 B65808-N1005-D1 B65808-N1006-D1 B65808-W1006-D1 B65808-N1005-D2 B65808-N1006-D2
B65808
2
14
30
73
4 pins
+0 6,5 ,15
4 Stifte 6 2 5
5 + 6 pins
5 und 6 Stifte 6
0,7
1 2
0,05
Pin 4 is omitted in 5-pin version
5 3 o7,45 _ 0,1 4 3 o12,3 _ 0,2
0,520,05
8,65 _ 0,1
7,85 _ 0,1
0,3 _ 0,1
0,850,06
o1,25 0,45 max.
Hole arrangement Lochgruppen View in mounting direction Ansicht in Montagerichtung
o1+0,1 o1+0,1
50,3
Ground O o1,3+0,1 Erdungspunkte 1,3+0,1
2,54
0,480,06
FRM0267-4
50
_ 10
205 08/01
RM 6 Accessories
Coil former, pins squared in the start-of-winding area Material: GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 C), color code blue Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s Winding: see "Processing Notes", page 153 For matching clamp and insulating washers see page 210. Sections 1 AN mm2 15 lN mm 30 A R value 69 Pins 4 5 6 4 6 Ordering code B65808-K1004-D1 B65808-K1005-D1 B65808-K1006-D1 B65808-K1004-D2 B65808-K1006-D2
B65808
2
14
30
73
4 pins
5 pins
6 pins
Hole arrangement View in mounting direction
Ground O 1,3+0,1
206 08/01
0,480,06
RM 6 Accessories
Coil former for SMPS transformers with line isolation The creepage distances and clearances are designed such that the coil former is suitable for use in SMPS transformers with line isolation.
I Closed center flange with external wire guide I Pins squared in the start-of-winding area I Optimized for use with automatic winding machines
B65808
Material:
GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code green Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s Winding: see "Processing Notes", page 153 Sections 2 AN mm2 14 lN mm 30 A R value 73 Pins 8 Ordering code B65808-X1108-D2
0,7
,15
8 7
0,05
1 2
Section C-D Schnitt C-D (onlyMittelflansch) (nur center flange)
View A Ansicht A
6,5
+0
6 5
3 4A o12,3 _ 0,2 o4,75 _ 0,1
6,35
0,470,05
0,7
0,05
0,470,05
C
D
0,45 max.
8,6 _ 0,1
7,8 _ 0,1
0,80,05
o0,52 max.
Ground O 1,3+0,1 Erdungspunkte o1,3+0,1
o1+0,1
50,3
Hole arrangement View in mounting direction
2,54
FRM0261-P
207 08/01
50
_1
0
RM 6 Accessories
Coil former for power applications with angled pins Optimized for automatic winding Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s Winding: see "Processing Notes", page 153 For matching clamp and insulating washer 1 see page 210 Sections 1 AN mm2 15 lN mm 30 A R value 69 Pins 8 Ordering code B65808-E1508-T1
B65808
8,5+0,2 6,5+0,2
Marking of pin 1
11,2+0,3 18,4 _ 0,4
0,50,1
3,3 _ 0,3
2,2 _ 0,2
o7,55 _ 0,2
7,95 _ 0,1
2,5 _ 0,15
12,3 _ 0,25
16 _ 0,4
0,950,1
0,5
Ground o1,3+0,15 Core 5
12,7 5,08
4
17,78
0,3
4,4 _ 0,3
3,81
8 15,24
1 o1+0,15
Hole arrangement View in mounting direction
FRM0298-Y
208 08/01
RM 6 Accessories
Coil former for power applications with straight pins Optimized for automatic winding Material: GFR polyterephthalate (UL 94 V-0, insulation class to IEC 60085: H max. operating temperature 180 C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s Winding: see "Processing Notes", page 153 For matching clamp and insulating washer 1 see page 210 Sections 1 AN mm2 15 lN mm 30 A R value 69 Pins 8 Ordering code B65808-W1508-T1
B65808
8,4+0,25 6,5+0,2
Marking of pin 1
12,3 _ 0,25
11,2+0,2 18,4 max.
7,95 _ 0,1 2,2 _ 0,2
0,950,1
0,50,1
o7,4 _ 0,15
0,45 Ground o1,3+0,15
Core 5 4
1,5
3
17,78
12,7 5,08
16 max.
8
1 15,24 o1+0,15
Hole arrangement View in mounting direction
3,81
FRM0299-7
209 08/01
RM 6 Accessories
Clamp
I With ground terminal, made of stainless spring steel (tinned), 0,435 mm thick I Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 C, 2 s I Also available as strip clamp on reels
B65808
Insulating washer 1 between core and coil former
I For tolerance compensation and for insulation I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 C), 0,08 mm thick
Insulating washer 2 for double-clad PCBs
I Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 C), 0,3 mm thick Ordering code
Clamp (ordering code per piece, 2 are required) Insulating washer 1 (reel packing, PU = 1 reel) Insulating washer 2 (bulk)
B65808-A2203 B65808-A5000 B65808-C2005
Clamp
0,85 _ 0,25
Insulating washer 1
Insulating washer 2
2,6 max.
_ 0,1 10,9 +0,2
0,85 _ 0,25
9,5+0,2
_ 0,2 4,5 +0,1
0,6
FRM0187-C
Clamping forces for RM 6
Fmin: Extension of clamp from a to a2 = Xmin Fmax: Extension of clamp from a to a1 = Xmax Clamp opening a (mm) Core nose Zmax (mm) Height of core pair X (mm) X min X max Clamping force F (N) Fmin Fmax 9,5 + 0,2 0,22 10,1 10,6 7 50
210 08/01
RM 6 Accessories
SMD coil former with gullwing terminals Material:
B65821 B65808
GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 C, 1 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s permissible soldering temperature for wire-wrap connection on coil former: 400 C, 1 s Winding: see "Processing Notes", page 160 Clamp
I Without ground terminal, made of stainless spring steel, 0,435 mm thick I Also available as strip clamp (each carton containing 2 reels) on request
Sections 1 2 Clamp Coil former
1 Kammer 1 section
AN mm2 16,2 15,2
lN mm 31 31
A R value 66 69
Terminals 8 8
Ordering code B65821-C1008-T1 B65821-C1008-T2 B65808-J2204 Clamp
(ordering code per piece, 2 are required)
o12,3 _ 0,2
2 Kammer 2 sections o7,45 _ 0,1 o6,5+0,15
7,95 _ 0,1
0,40,1
2,3 _ 0,05
0,85 _ 0,05
0,3
16,7 _ 0,2 11,1+0,2 1 2 8 7 6 5 22 _ 0,3
0,60,1
3 4
3,81
1,2 12,7 5,08 3,81
2,5 22,8
15,5 _ 0,2
Empfehlung fur das Recommended Leiterplattenlayout PCB layout
12,7
5,08
0,50,1
FRM0238-Q
211 08/01
RM 6 Accessories
SMD coil former with J terminals Material:
B65821 B65808
GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085: F max. operating temperature 155 C), color code black Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 C, 1 s Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 C, 3,5 s permissible soldering temperature for wire-wrap connection on coil former: 400 C, 1 s Winding: see "Processing Notes", page 160 Clamp
G Without ground terminal, made of stainless spring steel, 0,435 mm thick G Also available as strip clamp (each carton containing 2 reels) on request
Sections 1 Clamp
AN mm2 16,2
lN mm 31
A R value 66
Terminals 8
Ordering code B65821-J1008-T1 B65808-J2204
(ordering code per piece, 2 are required)
Coil former
8,4+0,2 o7,45 _ 0,1
Clamp
0,3
2,3 _ 0,1 2,10,1
0,50,05 0,850,05 0,3
7,95 _ 0,1
21,4 _ 0,2
3,81
12,3 _ 0,2
15,5 _ 0,2
1
8 7 6 16,7 _ 0,2
6,5+0,1
0,6
1,2 5,08
2,5 19
FRM0239-Y
11,1+0,2
0,60,05
Empfehlung fur das PCB layout Leiterplattenlayout
Recommended
5,08
3,81
1,70,05
4
5
212 08/01
3,81
2 3
12,7
RM 6 Accessories
Adjusting screw
I Tube core with thread and core brake made of GFR polyterephthalate
B65659 B63399
Plastic adjusting screwdriver (not shown) Plastic handle for adjusting screwdriver (not shown) Core RM 6 Material K1 M 33 N 48 A L value nH 40 63 100 160 250 315 400 Handle a a c a a b c Adjusting screw Fig. Tube core x length mm 2,62 x 3,7 2,62 x 3,7 2,82 x 4,4 2,62 x 3,7 2,62 x 3,7 2,75 x 4,4 2,82 x 4,4 Material Si 1 Si 1 Si 1 K1 N 22 N 22 N 22 Color code white white brown green red black yellow Min. Ordering code adjusting range % 15 17 16 17 11 13 11 B65659-F1-X101 B65659-F1-X101 B65659-F4-X101 B65659-F1-X1 B65659-F1-X23 B65659-F3-X23 B65659-F4-X23 B63399-B4 B63399-B5
Adjusting screwdriver
Adjusting screws a b c
213 08/01
Herausgegeben von EPCOS AG Marketing Kommunikation, Postfach 80 17 09, 81617 Munchen, DEUTSCHLAND EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfaltigung, Veroffentlichung, Verbreitung und Verwertung dieser Broschure und ihres Inhalts ohne ausdruckliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschure werden die Bauelemente spezifiziert, keine Eigenschaften zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen fur Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschure ersetzt die vorige Ausgabe. Fragen uber Technik, Preise und Liefermoglichkeiten richten Sie bitte an den Ihnen nachstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente konnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskunfte daruber bitten wir unter Angabe des betreffenden Typs ebenfalls uber die zustandige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
1

▲Up To Search▲

Price & Availability of B65821C1008T002

	To Download B65821C1008T002 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .